{"id":373,"date":"2026-07-04T22:42:57","date_gmt":"2026-07-04T22:42:57","guid":{"rendered":"https:\/\/sigmadesk.app\/blog\/?p=373"},"modified":"2026-07-04T22:42:59","modified_gmt":"2026-07-04T22:42:59","slug":"msa-gage-rr","status":"publish","type":"post","link":"https:\/\/sigmadesk.app\/blog\/msa-gage-rr\/","title":{"rendered":"Gage R&amp;R | MSA (Measurement System Analysis) Study"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">This article walks through the most widely used MSA method, the <strong>Gage R&amp;R study<\/strong> (Gage Repeatability and Reproducibility): what it measures, how to plan it, how to execute it on the shop floor, and how to interpret the results against industry acceptance criteria.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"Measurement System Analysis | Gage R&amp;R Study in Quality | Full Tutorial\" width=\"660\" height=\"371\" src=\"https:\/\/www.youtube.com\/embed\/2gD0r2aEnPs?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<p class=\"wp-block-paragraph\">Before you trust any measurement, you need to answer one question:<\/p>\n\n\n\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\">\n<p class=\"wp-block-paragraph\" style=\"font-size:22px\">Is the variation you see coming from your process, or from your measurement system itself?<\/p>\n<\/blockquote>\n\n\n\n<p class=\"wp-block-paragraph\">If the gage is unreliable, every control chart, every capability study, and every process decision built on that data is untrustworthy. This is why Measurement System Analysis (MSA) belongs at the start of any quality improvement project \u2014 not the end.<\/p>\n\n\n\n<h2 class=\"wp-block-heading has-text-align-center\">What a Gage R&amp;R Study Measures<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Every process produces variation, and when you measure a set of parts you observe a spread in the results. The key insight is that this observed spread is <strong>not<\/strong> pure part variation. It is the combination of the true variation between the parts and the variation added by the act of measuring them:<\/p>\n\n\n\n<p class=\"has-text-align-center wp-block-paragraph\" style=\"font-size:22px\">\u03c3\u00b2<sub>total<\/sub> = \u03c3\u00b2<sub>part<\/sub> + \u03c3\u00b2<sub>measurement<\/sub><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you want to see your natural process variation, the measurement system&#8217;s contribution must be small relative to the real process variation. Otherwise, measurement noise hides what the process is actually doing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Measurement system variation itself has two components, and separating them is the entire purpose of the study:<\/p>\n\n\n\n<p class=\"has-text-align-center wp-block-paragraph\" style=\"font-size:22px\">\u03c3\u00b2<sub>measurement<\/sub> = \u03c3\u00b2<sub>repeatability<\/sub> + \u03c3\u00b2<sub>reproducibility<\/sub><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Repeatability<\/strong> (equipment variation, EV) \u2014 the variation of the instrument or method itself: the spread you observe when the same operator measures the same part multiple times with the same instrument. If one person gets noticeably different readings on one part, the gage has a repeatability problem.<\/li>\n\n\n\n<li><strong>Reproducibility<\/strong> (appraiser variation, AV) \u2014 the variation between operators measuring the same parts with the same instrument. If operator A consistently reads differently than operator B, that difference usually points to technique, training, or an ambiguous measurement method.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Together, repeatability and reproducibility form the total measurement system variation, which is then evaluated two ways:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"607\" src=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-10-1024x607.png\" alt=\"\" class=\"wp-image-386\" srcset=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-10-1024x607.png 1024w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-10-300x178.png 300w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-10-768x455.png 768w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-10.png 1332w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Metric<\/th><th>Compares measurement variation against<\/th><th>Use when the gage is used for<\/th><\/tr><\/thead><tbody><tr><td><strong>% Study Variation<\/strong><\/td><td>Total observed variation (parts + measurement)<\/td><td>Process control and improvement<\/td><\/tr><tr><td><strong>% Tolerance<\/strong><\/td><td>The specification width (USL \u2212 LSL)<\/td><td>Inspection against customer or design specs<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Putting it all together: <\/p>\n\n\n\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\">\n<p class=\"wp-block-paragraph\" style=\"font-size:22px\">A Gage R&amp;R study is a structured experiment in which several operators measure the same set of parts multiple times, so the total variation can be decomposed into repeatability, reproducibility, and part-to-part variation \u2014 and the acceptability of the measurement system can be judged with numbers rather than opinions.<\/p>\n<\/blockquote>\n\n\n\n<h2 class=\"wp-block-heading has-text-align-center\">Planning the Study<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The quality of your planning determines whether the study can be trusted at all. The standard <strong>crossed Gage R&amp;R design<\/strong> uses:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Parameter<\/th><th>Standard value<\/th><th>Notes<\/th><\/tr><\/thead><tbody><tr><td>Parts<\/td><td>10<\/td><td>Must span the full range of real process variation<\/td><\/tr><tr><td>Operators<\/td><td>3<\/td><td>The people who actually perform this measurement in production<\/td><\/tr><tr><td>Trials (replicates)<\/td><td>3<\/td><td>Each operator measures each part this many times<\/td><\/tr><tr><td><strong>Total measurements<\/strong><\/td><td><strong>90<\/strong><\/td><td>10 \u00d7 3 \u00d7 3<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">These numbers can be adjusted, but this combination is the industry default because it balances statistical power against practical effort.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Three planning rules matter more than anything else:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Select parts across the full process spread.<\/strong> Do not grab ten parts from the same box produced in the same hour. Pull parts from different hours, batches, shifts, or mold cavities \u2014 including parts near both specification limits if possible. If the parts are too similar, part-to-part variation will look tiny and the study will unfairly blame the gage.<\/li>\n\n\n\n<li><strong>Use the real operators.<\/strong> Choose the people who actually perform this measurement in daily production. Using your best metrology specialist when the routine measurements are done by line operators produces a study that describes a system that does not exist.<\/li>\n\n\n\n<li><strong>Use the real gage, calibrated.<\/strong> Run the study with the same instrument used in production, and verify its calibration status before starting.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading has-text-align-center\">Executing the Study<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The walkthrough below uses <a href=\"https:\/\/sigmadesk.app\/blog\/msa-gage-rr-study-calculator\/\">MSA module<\/a> on SIGMADESK.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" style=\"font-size:22px\">1. Define the study<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">From the dashboard, open the MSA module and create a new study. Enter a descriptive <strong>study name<\/strong> (e.g., &#8220;Shaft Diameter Gage Study \u2014 Line 3&#8221;), the exact <strong>gage name<\/strong> with its identification number, and any relevant notes. Do not skip these fields: six months from now, or when an auditor asks, this header is what documents what was measured, with which gage, and why.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"879\" height=\"1024\" src=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-879x1024.png\" alt=\"\" class=\"wp-image-376\" style=\"aspect-ratio:0.8583888866711907;width:424px;height:auto\" srcset=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-879x1024.png 879w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-257x300.png 257w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-768x895.png 768w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image.png 1010w\" sizes=\"auto, (max-width: 879px) 100vw, 879px\" \/><\/figure>\n<\/div>\n\n\n<h3 class=\"wp-block-heading\" style=\"font-size:22px\">2. Generate the worksheet<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If you have already collected measurements elsewhere, you can paste in your own dataset. Starting from zero, the recommended path is a <strong>preset worksheet<\/strong>: enter 10 parts, 3 operators, and 3 replicates, and the application builds the entire study structure. Rename operators to their real names or initials \u2014 it makes the results far easier to discuss with the team afterwards.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">One configuration detail deserves special attention: <strong>randomized run order<\/strong>. When enabled (the default), the measurement sequence is shuffled within each operator, so nobody measures part 1, part 2, part 3 in a predictable line. This matters because if an operator remembers that part 5 read 12.03 on the first trial, they will unconsciously steer toward the same reading on the second trial. The gage will look more consistent than it really is, and the results will be too optimistic. Randomizing the order \u2014 and keeping part identities hidden from the operator \u2014 protects the study from this bias.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"996\" src=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-1-1024x996.png\" alt=\"\" class=\"wp-image-377\" srcset=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-1-1024x996.png 1024w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-1-300x292.png 300w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-1-768x747.png 768w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-1-1536x1494.png 1536w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-1.png 1848w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\" style=\"font-size:22px\">3. Record the measurements<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The generated worksheet contains one row per measurement \u2014 90 rows in total, each with a run order number, a part, an operator, and an empty measurement cell. The design columns are locked; the only thing you type is the measured value.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Follow the worksheet from top to bottom: hand the indicated part to the indicated operator, record the reading, move to the next row. Ideally, the person handling the parts and the worksheet is not the person measuring \u2014 the operator only measures and reads the value aloud, without seeing part labels or previous results.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Two rules while recording:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Enter values exactly as the gage displays them<\/strong>, with all decimals. Do not round.<\/li>\n\n\n\n<li><strong>No do-overs.<\/strong> If a reading looks strange, enter it anyway. That strange reading may be exactly the measurement system behavior you are trying to detect. You are testing the system as it normally operates, not staging an ideal showcase.<\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"496\" src=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-4-1024x496.png\" alt=\"\" class=\"wp-image-380\" srcset=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-4-1024x496.png 1024w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-4-300x145.png 300w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-4-768x372.png 768w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-4-1536x745.png 1536w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-4-2048x993.png 2048w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\" style=\"font-size:22px\">4. Map columns and enter tolerance limits<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">With a preset worksheet, the part, operator, and measurement columns are recognized automatically. One optional field is worth filling in: the <strong>lower and upper specification limits<\/strong> of the measured characteristic. This enables the % Tolerance calculation. Skipping it still produces the study variation results, but you lose the second acceptance criterion.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"352\" src=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-5-1024x352.png\" alt=\"\" class=\"wp-image-381\" srcset=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-5-1024x352.png 1024w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-5-300x103.png 300w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-5-768x264.png 768w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-5-1536x528.png 1536w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-5-2048x703.png 2048w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Two classical methods exist. The <strong>Average and Range method<\/strong> is simpler to compute by hand, but the <strong>ANOVA method<\/strong> is the modern standard because it can detect the operator-by-part interaction, which the range method cannot see. Every serious software tool uses ANOVA, and that is what the results below are based on.<\/p>\n\n\n\n<h2 class=\"wp-block-heading has-text-align-center\">Interpreting the Results<\/h2>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"472\" src=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-7-1024x472.png\" alt=\"\" class=\"wp-image-383\" srcset=\"https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-7-1024x472.png 1024w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-7-300x138.png 300w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-7-768x354.png 768w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-7-1536x707.png 1536w, https:\/\/sigmadesk.app\/blog\/wp-content\/uploads\/2026\/07\/image-7-2048x943.png 2048w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The core output is the <strong>Gage Evaluation table<\/strong>. The columns are:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>StdDev (\u03c3)<\/strong> \u2014 the standard deviation attributed to each variation source.<\/li>\n\n\n\n<li><strong>Study Variation (6\u03c3)<\/strong> \u2014 six times the standard deviation. Because \u00b13\u03c3 covers approximately 99.7% of a normal distribution, 6\u03c3 is the conventional window representing the full spread of each source.<\/li>\n\n\n\n<li><strong>% Study Variation<\/strong> \u2014 each source&#8217;s 6\u03c3 as a percentage of total study variation.<\/li>\n\n\n\n<li><strong>% Tolerance<\/strong> \u2014 each source&#8217;s 6\u03c3 as a percentage of the specification width.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Here are the results from the shaft diameter study:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Source<\/th><th>% Study Variation<\/th><th>Interpretation<\/th><\/tr><\/thead><tbody><tr><td><strong>Total Gage R&amp;R<\/strong><\/td><td>20.08%<\/td><td>Variation belonging to the measurement system<\/td><\/tr><tr><td>\u2014 Repeatability<\/td><td>18.43%<\/td><td>Equipment\/method variation<\/td><\/tr><tr><td>\u2014 Reproducibility<\/td><td>7.96%<\/td><td>Operator-to-operator variation<\/td><\/tr><tr><td><strong>Part-to-Part<\/strong><\/td><td>97.96%<\/td><td>Real differences between products<\/td><\/tr><tr><td><strong>Total Variation<\/strong><\/td><td>100.00%<\/td><td>By definition<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Two observations from this table:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Repeatability dominates the measurement error.<\/strong> At 18.43%, it is more than twice reproducibility (7.96%). The three operators agree with each other quite well; the instrument itself is the weaker link. This single comparison tells you where to look first if the system needs improvement.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Part-to-part variation is 97.96% \u2014 exactly what you want.<\/strong> In a healthy measurement situation, most observed variation should come from the parts, not from the act of measuring them. The gage is spending its effort seeing real product differences, not its own noise.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" style=\"font-size:22px\">Why the percentages exceed 100%<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A common point of confusion: 20.08% + 97.96% is clearly more than 100%. Is the table wrong? No \u2014 <strong>standard deviations do not add; variances do.<\/strong> The columns are consistent in squares:<\/p>\n\n\n\n<p class=\"has-text-align-center wp-block-paragraph\" style=\"font-size:22px\">20.08\u00b2 + 97.96\u00b2 \u2248 403 + 9,596 \u2248 10,000 = 100\u00b2<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Alongside the Gage Evaluation table, a full ANOVA report also provides the variance components table, the raw sums of squares, and six diagnostic charts if you want to verify the mathematics. But for the acceptance decision, the Gage Evaluation table is where the answer lives.<\/p>\n\n\n\n<h2 class=\"wp-block-heading has-text-align-center\">Acceptance Criteria<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The decision rules below follow the AIAG MSA guidelines used across most industries:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>% Gage R&amp;R<\/th><th>Verdict<\/th><th>Action<\/th><\/tr><\/thead><tbody><tr><td>Under 10%<\/td><td><strong>Acceptable<\/strong><\/td><td>The measurement system can be trusted<\/td><\/tr><tr><td>10%\u201330%<\/td><td><strong>Conditionally acceptable<\/strong><\/td><td>May be tolerated depending on the importance of the application, the cost of the gage, and the cost of improvement \u2014 document the justification<\/td><\/tr><tr><td>Over 30%<\/td><td><strong>Unacceptable<\/strong><\/td><td>The measurement system must be improved before relying on its data<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Decide <em>up front<\/em> which benchmark drives the decision. If the gage is used for <strong>process control and improvement<\/strong>, judge against % Study Variation. If it is used primarily for <strong>inspection against specifications<\/strong>, % Tolerance is the more relevant criterion.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">By these rules, the example study \u2014 20.08% Gage R&amp;R with repeatability as the dominant component \u2014 is conditionally acceptable, with a clear improvement target: the equipment, not the operators.<\/p>\n\n\n\n<h2 class=\"wp-block-heading has-text-align-center\">What to Do When a Study Fails<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The diagnosis depends on which component dominates:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>If repeatability dominates<\/strong>, the problem is the equipment or the method. Investigate gage resolution, wear, fixturing, part clamping, and environmental factors such as vibration or temperature. Sometimes the fix is as simple as a better fixture that locates the part the same way every time.<\/li>\n\n\n\n<li><strong>If reproducibility dominates<\/strong>, the problem is between operators, which almost always means the measurement procedure is ambiguous. Standardize the method: define exactly where on the part to measure, how much force to apply, and how to read the scale. Retrain everyone to that single standard, then repeat the study.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading has-text-align-center\">Summary of MSA Study<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A trustworthy measurement system is the foundation of everything else you do in quality. A crossed Gage R&amp;R study \u2014 ten parts spanning the real process spread, three production operators, three randomized trials \u2014 decomposes your observed variation into repeatability, reproducibility, and part-to-part components, and gives you an objective, numbers-based verdict on whether your gage can be trusted.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you want to run your own Gage R&amp;R analysis without expensive software, try <a href=\"https:\/\/sigmadesk.app\/blog\/msa-gage-rr-study-calculator\/\" data-type=\"page\" data-id=\"319\">MSA calculator on SigmaDesk<\/a>. It is entirely web-based, and you can go from raw data to a full ANOVA report in minutes.<\/p>\n\n\n\n<h2 class=\"wp-block-heading has-text-align-center\">Frequently Asked Questions<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" style=\"font-size:22px\">What is the difference between repeatability and reproducibility?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Repeatability is the variation observed when the same operator measures the same part multiple times with the same instrument \u2014 it reflects the equipment or method. Reproducibility is the variation between different operators measuring the same parts \u2014 it reflects differences in technique or training.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" style=\"font-size:22px\">How many parts, operators, and trials do I need for a Gage R&amp;R study?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The industry standard is 10 parts, 3 operators, and 3 trials, giving 90 measurements. These numbers can be adjusted, but this combination balances statistical power with practical effort.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" style=\"font-size:22px\">Should I use the ANOVA method or the average and range method?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Use ANOVA. It is the modern standard because it can detect the operator-by-part interaction, which the average and range method completely misses.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" style=\"font-size:22px\">What is an acceptable Gage R&amp;R percentage?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Under the AIAG guidelines, below 10% is acceptable, 10\u201330% is conditionally acceptable depending on the application and cost of improvement, and above 30% is unacceptable.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>This article walks through the most widely used MSA method, the Gage R&amp;R study (Gage Repeatability and Reproducibility): what it measures, how to plan it, how to execute it on the shop floor, and how to interpret the results against industry acceptance criteria. Before you trust any measurement, you need to answer one question: Is [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_coblocks_attr":"","_coblocks_dimensions":"","_coblocks_responsive_height":"","_coblocks_accordion_ie_support":"","hide_page_title":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-373","post","type-post","status-publish","format-standard","hentry","category-educational"],"_links":{"self":[{"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/posts\/373","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/comments?post=373"}],"version-history":[{"count":3,"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/posts\/373\/revisions"}],"predecessor-version":[{"id":388,"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/posts\/373\/revisions\/388"}],"wp:attachment":[{"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/media?parent=373"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/categories?post=373"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sigmadesk.app\/blog\/wp-json\/wp\/v2\/tags?post=373"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}